No longer available. Please look at our CFE Ultra for more information.
Adds and automates functions in a Volvo without making any changes to your Volvo!
And as always without subscription. All firmware and feature updates for this device will be free!
How it works
For more information: https://www.swedesolutions.com/cfe-capabilities/
The CFE Plus WiFi (Unit) needs configuration to make sure the Unit knows what Volvo it is going to be used in and what and how functions should work.
This configuration is performed with the updater software (License included, directly available after purchase), installed and run on a PC with at least Windows 8.
The Unit needs to be connected to the PC with a Configuration and USB cable (Both supplied in the set).
Once you finalized the configuration and all functions are setup with the desired options; the CFE Plus WiFi can be connected to your Volvo.
The Unit connects to the Can-busses (Networks) in your Volvo and acts like an additional ECU (Computer).
To avoid possible mistakes in configuration, the Unit starts an “Initialization” after first Ignition (Made visible to the user by enabling the blue high-beam light in the dashboard while the initialization process is going on) and tries to match the made configuration with the actual Volvo.
If all matches the Initialization will finish and the Unit is ready for operation.
Now the CFE Plus is ready to perform its tasks.
For example; if you lock your Volvo with the keyfob, the CFE Plus will notice this on the Canbus and decide to close the windows for you.
For P2 (S60/V70/XC70/S80/XC90) up to and including modelyear 2004, installation of the connection harness is required.
All other supported models/modelyears will allow a direct plug-and-play connection into the OBD Port (Onboard Diagnostic Port) of your Volvo.